Liebherr R980 SME Crawler excavator

Nr. 6740, 1:32

There‘s something big on track(s) to the playroom building site. The new crawler excavator from the Liebherr brand sets new yardsticks in the SIKUCONTROL32 series in terms of size, weight, and functionality. The 2.4 GHz RC model, made mainly from metal (!) weighs in at around 2.5 kg. A total of six electronic proportionally controlled high output gears moves this monumental RC vehicle safely and accurately to its goal. The right and left sides of the crawler chassis can each be individually and proportionally steered, in order to manoeuvre the excavator accurately to its desired location. The turret can be rotated through 360 degrees and more, because this runs without cables on a „RING“. The question of which is the front of the excavator when the turret has been turned several times during an extended period of excavation is sometimes not at all easy to answer. This is where the electronics come in. Just with a press of a button, the turret is moved to the „normal position“. This means: Where the excavator arm points is forwards. The excavator is proportionally controlled by means of three gears, and is capable of excavating just like the original - and that means even below the floor line. And so the excavation of trenches or pits is possible. The excavator is operated via a remote control. With this command centre, the excavator driver has all functions to hand. The new joystick control elements duplicate the actual control movements of an excavator just like the original. Using the new controller, there is no problem in issuing accurate control commands for excavation, firming, spreading, and breaking up. For safety when operating the model, and also to avoid damage, each of the six gears is equipped with a sliding clutch. LED-based lighting rounds out this visually and technically outstanding model. Power is provided to the model via three Baby-C batteries. To operate the remote control, four AA batteries are required. Rechargeable batteries are also approved for use in the model.


   



Scania with tipping trailer remote control and charger

Nr. 6725, 1:32

Impressive combination of the new Scania R620 towing vehicle with halfpipe tipper trailer from the Schmitz-Cargobull brand. Both models are fitted with independent transmitter and receiver units based on 2.4 GHz radio technology. Driver and steering function as well as coupling of the towing vehicle are proportionately steered with servo engines. The Scania is fitted with an ultra-powerful battery as power source. The trailer also includes its own battery and can be used without the towing vehicle. In addition to the rear lighting and indicators, the support struts and tipper function with dumper can also be electronically controlled. The set is supplied with remote control unit, battery charger and network component.


            







MAN+Low Load. Set with R/C

Nr. 6721, 1:32

Impressive combination of the new MAN towing vehicle with halfpipe tipper trailer from the trailer brand. Both models are fitted with independent transmitter and receiver units based on 2.4 GHz radio technology. Driver and steering function as well as coupling of the towing vehicle are proportionately steered with servo engines. The MAN is fitted with an ultra-powerful battery as power source. The trailer also includes its own battery and can be used without the towing vehicle. In addition to the rear lighting and indicators, the support struts and tipper function with dumper can also be electronically controlled. The set is supplied with remote control unit, battery charger and network component.



John Deere 7R with front loader and remote control

Nr. 6777, 1:32

High-end model from the latest John Deere 7R series with electronically controlled front loader. Radio remote-controlled tractor from the SIKU Control series to 1:32 scale made of die-cast metal. Proportional steering and speed as well as servo-powered rear coupling system. The shovel and front loader rocker arm are individually powered by two servos. Model with 5 servo engines, each being safety assured with a separate safety clutch. The driving and works light on the cab roof has white front LEDs and red LED rear lights. With indicator functionality and separate right- and left-hand steering. Universal lighting system with orange LEDs can be individually switched on and off. Model with remote control. Powered with 3 AAA batteries. Batteries not supplied.



Claas Axion 850 Set + R/C

Nr. 6882, 1:32

Existing radio components using the 2.4 GHz wavelength and simpler production have helped to make the highly complex SIKU Control32 technology available for a more reasonable price. The stable and high-quality tractors produced in die-cast metal and plastic will be easy to operate with the newly developed radio control module. The driving and steering functions have been completed proportionately and facilitate precise driving and manoeuvring. The light at the front and rear is permanently switched on during operation. In stand-by mode, i.e. after switching on the model and before connection to the radio-control module, the flashing light indicates the model is ready for start-up. The model is powered with three standard “AAA” batteries. Rechargeable batteries of the same type can also be used. If the batteries run below a specific level during operation, the light flashes rapidly indicating that the batteries will soon be empty. Two identical batteries also power the radio-control module. All SIKU Farmer32 trailers and coupling devices for front and rear coupling can be used with these models. The integrated play system will also be continued with all new models. The data socket integrated at the rear section of the tractors facilitates use of Control accessory models such as trailers, whirl rakes and ploughs.




JD 8345R Set + R/C

Nr. 6881, 1:32

The stable and high-quality tractors produced in die-cast metal and plastic will be easy to operate with the newly developed radio control module. The driving and steering functions have been completed proportionately and facilitate precise driving and manoeuvring. The light at the front and rear is permanently switched on during operation. In stand-by mode, i.e. after switching on the model and before connection to the radio-control module, the flashing light indicates the model is ready for start-up. The model is powered with three standard “AAA” batteries. Rechargeable batteries of the same type can also be used. If the batteries run below a specific level during operation, the light flashes rapidly indicating that the batteries will soon be empty. Two identical batteries also power the radio-control module. All SIKU Farmer32 trailers and coupling devices for front and rear coupling can be used with these models. The integrated play system will also be continued with all new models. The data socket integrated at the rear section of the tractors facilitates use of Control accessory models such as trailers, whirl rakes and ploughs.


Accessories


Seven-furrow Reversible Plough

Nr. 6783, 1:32

7-blade Vogel&Noot die-cast metal plough. Suitable for all Control-series model tractors. Connects to tractor models using the supplied data cable. The plough has servo-powered rotating functionality.



Cultivator

Nr. 6784, 1:32

Vogel&Noot cultivators in the largest S800 version with a working width of over seven metres. With die-cast metal frame construction. Zinc and rotating rollers are made from plastic. The single axle chassis can be manually extended and is ready for transport when the cultivator elements are electronically raised, and returns to its working position when cultivator elements are lowered. The wheels and central axle on the front frame feature original detailing and agricultural track. With rubberized tyres. Suitable for all Control tractor models (infrared and radio-controlled). Connects to tractor models using the supplied data cable. Servo-powered raise and lowering function of the cultivator elements in transport and work modes. Only for use indoors.



Twin Rotor Cake

Nr. 6782, 1:32

The world's first electronically controlled 2-lateral swather to a model scale of 1:32. With a precisely functioning servo engine for precision raising and lowering of the swather mechanism at the front turning point. The swathers' turning mechanism is produced mechanically. The swather is connected to the tractor via a data cable. The existing remote control unit can be used to activate the swather function. Rear lighting with red LEDs as well as right and left indicators with yellow LEDs complete the image of one of the world's top quality 1:32 model scale working devices.



Tandem Trailer (twin axled)

Nr. 6780, 1:32

Electronically controlled tandem-axle trailer with independent power source by battery. The trailer is connected to the tractor via a data cable. The trailer's dumper is electronically tilted to the rear. The existing remote-control module can be used to activate this function. At the trailer's rear, red and orange LEDs create rear light and indicators. Due to the independent power source, the trailer can also be operated without control tractor or via the remote control unit. The relevant switches are fitted on the model, so that the tilting and lights can be controlled.